Flasc Paintball

The Micro Bore Barrel system from Flasc Paintball is the next step towards complete customization in a barrel system. The Micro barrel control bore is 2.5" long and comes in 5 different bore sizes (listed below) Included is at least one barrel tip and a 9" extension (for 11.5" length before tip) with Gen2 Porting. The Micro Bore barrel kit is also fully compatible with all Flasc Paintball barrel extensions tips and accessories which allow the possibility of hundreds on hundreds of options such as Length, Porting, Range, Volume, Efficiency etc. Nearly every aspect of the Micro barrel system can be completely customized to suit your specific barrel needs.

In 2010 Flasc Paintball also introduced the new Gen2 Porting system which improves on consistency, efficiency and further reduces volume better than traditional porting. Gen2 Porting is used on the 9" barrel extension included with the Micro Bore barrel kit.

The main difference between the Flasc barrel kits and other barrels kits available is our full use of control bores and our double threaded tips. Our control bores are male threaded, which means if the barrel is 2.5" long then your control bore is 2.5" long. However most companies use Female threaded backs, which means if the back is 2.5" long, half of it is control bore and half of it is female threading, so your paintball only gets about a inch or so of actual contact with the control bore before it exits the back and enters the front. With Flasc kits your ball has the full 2.5" of control bore before leaving for the best possible performance.

We do not use "fronts" and "backs" but we use barrels instead of backs and extensions instead of fronts. this means that the "back" is actually a short barrel, so if you want to take your barrel tip and screw it onto the barrel and leave the extension in your case, that’s no problem at all and it will fit just fine and you will have a super short barrel perfect for CQB. This also means if you want to get additional extensions you can use as many as you want in conjunction with each other for additional length and porting options.

The Logo is added underneath the threading. We know how annoying it can be to have a beautifully set up tactical marker and have a nice big white mark on the barrel to hurt the look so we included the logo but made it so that once the barrel is screwed into the marker the logo is not visible and protected!!

Also included is the Flasc Paintball Micro barrel case, the Micro case has room for all 5 bore size barrels, 6 barrel tips, one extension plus a BT Apex tip. if you wish to upgrade to the Universal Barrel case you will have an additional 11 slots for barrels, extensions or tips plus an additional large slot for the Flasc Paintball fake Suppressor.

 The Flasc Paintball Micro Bore Barrel Kit Includes:

• .678 Bore size barrel
• .681 Bore size barrel
• .684 Bore size barrel
• .687 Bore size barrel
• .690 Bore size barrel
  •  9" Barrel Extension with gen2 porting
  • At least 1 barrel tip (depending on selected options)
  • Flasc Paintball carry case

+Key benefits of Micro Bore Control Kit

• Great control over paintball boring
• Best Value / Price
• Best flexibility with barrel length options