Flasc Paintball

The new Micro Barrel system from Flasc Paintball is the next step towards complete customisation in a barrel system. The Micro barrel is 2.5" long and comes in 5 different bore sizes (listed below) with the use of our extremily versatile extensions and barrel tips you have hundreds on hundreds of options such as Length, Porting, Range, Volume, Efficency etc. Nearly every aspect of the Micro barrel system can be completly customised to suit your specific barrel needs.

 *Gen2 Micro bore barrels are on Clearance as they will shortly be replaced by the new Gen3 Micro Bore Barrels*

Features Include

• Control Bore
  •  The Micro Barrel by itself is 2.5" long and it includes a full 2.5" control bore, most barrels that use "backs" or "sizers" are female threaded at the tip, meaning if the back is 2.5" long, only half of that is actual control bore and the rest is threading. Meaning many of  these systems have control bores that are not much more then a single inch in length. As all of our barrels, both the Micro barrels and our full 9" control bore systems use Male threading on the outside of the barrel meaning the inside is used completely to control the paintball with nothing wasted for the maximum possible performance.
  • Bore sizes avaiable are .678/.681/.684/.687/.690
• Barrel Length
  • The Micro Barrel is 2.5" long, but with one of our standard tips attached the total length is usually between 4.5 and 5.5 inches total
  • Because of our extension system you can add extensions to get virtually any size you desire, Extensions currently come in 3" 5" and 9" and can be used in combination, for example just a few possible lengths include (before barrel tip) (2.5"/5.5"/7.5"/8.5"/10.5"/11.5"/12.5" etc etc)
• Porting
  • While the Micro Barrel itself is not ported you can add any of our extensions to make the barrel your desired length and add whatever porting you choose. there are 3 different extension lengtths and between those 3 lengths there is 7 different options (3" and 5" each comes in Unported, ported and double ported while the 9" comes with gen2 porting) and remember you can always combine multiple extensions to create your own style!
• Logo
  • The Logo is added underneath the threading. We know how annoying it can be to have a beautifully set up tactical marker and have a nice big white mark on the barrel to hurt the look so we included the logo but made it so that once the barrel is screwed into the marker the logo is not visible and protected!!
• Barrel Tips
  • The Micro barrels are also fully compatable with all Flasc barrel tips (save Gen1 Fake suppressors, all fake suppressors sold in the future will be fully compatabale) including the Apex and all our Milsim Tips